Product Overview
A CNG Daughter Station receives compressed natural gas (CNG) from tube trailers and supplies it to vehicles or downstream users at locations without direct access to natural gas pipeline networks. The system typically includes gas unloading, compression, storage, cooling and dispensing equipment.
Qingdao Lenado Intelligent Equipment Co., Ltd. provides CNG daughter station compressors and skid-mounted systems for station investors, EPC contractors, gas distributors, commercial fleet operators and industrial gas users. Equipment can be supplied as individual compressor packages or integrated station systems according to project requirements.
-
CNG Substation Integrated CompressorThe CNG Substation Integrated Compressor is an all-in-one skid-mounted solution for CNG stations supplied by tube trailers. It integrates gas unloading, hydraulic compression, cascade storage, cooling and vehicle dispensing in one...view more
-
Integrated LNG Skid-Mounted StationThe Integrated LNG Skid-Mounted Station is an integrated LNG transfer and vehicle refueling solution designed for commercial LNG fueling facilities. It combines tanker unloading, storage tank pressure and temperature management,...view more
-
CNG Hydraulic Piston-type Sub-station CompressorThe CNG Hydraulic Piston-type Sub-station Compressor is designed to pressurize natural gas transferred from mobile storage facilities for downstream supply at CNG daughter stations. It provides a high-pressure compression solution for...view more
-
CNG Integrated Liquid-Driven Substation CompressorThe CNG Integrated Liquid-Driven Substation Compressor is designed for CNG daughter stations supplied by transport trailers. It integrates gas unloading, compression, storage and vehicle refueling functions, with integrated and modular...view more
-
Hydraulic Piston Natural Gas CompressorThe Hydraulic Piston Natural Gas Compressor is designed for CNG daughter stations receiving natural gas from tube trailers. It compresses incoming gas to high pressure for downstream storage and vehicle refueling, serving station...view more
-
Integrated CNG Daughter Station Compressor SystemThe Integrated CNG Daughter Station Compressor System is a complete skid-mounted CNG fueling solution for locations without pipeline gas infrastructure. It integrates gas unloading, hydraulic compression, cascade storage, vehicle...view more
-
CNG Hydraulic Reciprocating Daughter Station CompressorThe CNG Hydraulic Reciprocating Daughter Station Compressor is designed for CNG daughter stations supplied by tube trailers. It integrates hydraulic drive, oil-free two-stage compression and hybrid water-air cooling to deliver...view more
-
CNG Substation CompressorThe CNG Substation Compressor is a hydraulic-driven compression system designed for CNG daughter stations supplied by tube trailers. It raises incoming natural gas to high pressure for storage and vehicle refueling, making it suitable...view more
-
CNG Mother Station EquipmentCNG Mother Station Equipment is designed to compress pipeline natural gas and fill high-pressure CNG tube trailers for delivery to daughter stations and off-grid gas users. It provides compression solutions for large-scale CNG...view more
-
Gas Daughter Station CompressorThe Gas Daughter Station Compressor is a core compression unit for CNG daughter stations, designed to compress natural gas from tube trailers or low-pressure pipeline networks for vehicle refueling. It is suitable for CNG station...view more
-
CNG Daughter Station EquipmentCNG Daughter Station Equipment receives natural gas from tube trailers or compatible pipeline sources, compresses it and delivers CNG to vehicles through a controlled refueling system. It provides an integrated compression and refueling...view more
-
CNG Mobile Daughter StationThe CNG Mobile Daughter Station is a trailer-mounted gas distribution and refueling solution designed for projects requiring CNG supply without permanent pipeline infrastructure. It receives compressed natural gas from mother stations...view more
CNG Daughter Station Products
Lenado's product range covers hydraulic compression equipment, standalone compressor packages and integrated CNG daughter station systems. The main differences relate to compression arrangement, system integration and the scope of equipment supplied.
Integrated CNG Daughter Station Systems
Integrated systems combine selected station equipment into a packaged arrangement. Depending on the model, the scope may include a hydraulic reciprocating compressor, unloading column, cooling equipment, cascade storage cylinders and dispensers.
Skid-mounted integration helps reduce on-site equipment connections and simplifies installation. The equipment layout and supply scope depend on the selected configuration.
Hydraulic Piston-Type CNG Compressors
Hydraulic piston-type compressors use a hydraulic power unit to drive reciprocating compression pistons. The separation of the hydraulic and gas chambers supports oil-free gas compression.
These compressors can be supplied as independent units or incorporated into integrated station systems. Cooling arrangements and compression stages vary by model.
Standalone and Dual-System Compressor Packages
Standalone compressor packages provide compression capacity for new or existing CNG facilities and can connect to separately supplied storage and dispensing equipment.
Selected dual-system models use two independent compression units. Depending on station demand and the control arrangement, the units can operate independently, simultaneously or in standby mode.
Integrated Compressor Skid Series
The TYCZ-JS series combines compression equipment with selected station components, including storage cylinders, unloading columns and dispensers. Its equipment scope and dimensions vary by model.
Technical Specifications
The following specifications are model-specific and should not be treated as universal values for all CNG daughter station configurations.
TYCZ-SJ Integrated CNG Substation Compressor
|
Technical Parameter |
TYCZ-SJ 2000 |
TYCZ-SJ 2500 |
|
Gas Source |
CNG tank truck |
CNG tank truck |
|
Inlet Pressure |
3–20 MPa |
3–20 MPa |
|
Maximum Working Pressure |
≤25 MPa |
≤25 MPa |
|
Nominal Hourly Displacement |
2,000 Nm³/h |
2,500 Nm³/h |
|
Compression Stage |
Two-stage |
Two-stage |
|
Compression Type |
Hydraulic reciprocating |
Hydraulic reciprocating |
|
Cooling Method |
Water circulation + forced-air cooling |
Water circulation + forced-air cooling |
|
Gas Chamber Lubrication |
Oil-free |
Oil-free |
|
Control System |
PLC automatic control |
PLC automatic control |
|
Storage Cylinder Water Volume |
2.76 m³ |
2.76 m³ |
|
Installation |
Integrated skid-mounted |
Integrated skid-mounted |
TYCZ-S Dual-System Compressor Series
|
Model |
Average Displacement (Nm³/h) |
Motor Power (kW) |
Dimensions (mm) |
|
TYCZ-S-1200 |
1,200 |
30 × 2 |
4200 × 2300 × 2500 |
|
TYCZ-S-1600 |
1,600 |
37 × 2 |
4200 × 2300 × 2600 |
|
TYCZ-S-2400 |
2,400 |
45 × 2 |
4200 × 2300 × 2600 |
|
TYCZ-S-4000 |
4,000 |
90 × 2 |
4200 × 2600 × 3050 |
|
TYCZ-S-4500 |
4,500 |
110 × 2 |
4200 × 2600 × 3100 |
TYCZ-JS Integrated Compressor Skid Series
|
Model |
Average Displacement (Nm³/h) |
Motor Power (kW) |
Dimensions (mm) |
Published Configuration |
|
TYCZ-JS-1200 |
1,200 |
30 × 2 |
8000 × 2300 × 2500 |
2.0 m³ cylinder group, 1 unloading column, 1 dispenser |
|
TYCZ-JS-1600 |
1,600 |
37 × 2 |
9000 × 2300 × 2600 |
2.0 m³ cylinder group, 1 unloading column, 2 dual-nozzle dispensers |
|
TYCZ-JS-2400 |
2,400 |
45 × 2 |
12000 × 2800 × 3000 |
3.0 m³ cylinder group, 1 unloading column, 2 dual-nozzle dispensers |
|
TYCZ-JS-4000 |
4,000 |
90 × 2 |
12000 × 2800 × 3000 |
3.0 m³ cylinder group, 1 unloading column, 4 dual-nozzle dispensers |
The TYCZ-S series is listed as a dual-system compressor package, while the TYCZ-JS series includes additional station equipment. Their equipment scope and installation dimensions should be considered when comparing configurations.
System Configurations & Equipment Selection
CNG daughter station equipment can be supplied as a complete integrated system or as individual compressor packages connected to existing station infrastructure.
Main Configuration Options
• Integrated Skid-Mounted System
Combines compression equipment with selected unloading, cooling, storage and dispensing components. It is suitable for projects requiring a packaged equipment arrangement.
• Standalone Compressor Skid
Provides compression capacity for connection to existing storage, piping and dispensing systems. It can be considered for station expansion or compressor replacement.
• Dual-System Compression
Uses two independent compressor units to provide flexible operating arrangements. Depending on the selected model and control design, the units can run separately, simultaneously or in standby mode.
• Mobile CNG Daughter Station
A trailer-mounted arrangement may be considered for relocatable or temporary gas supply projects. The available equipment scope and configuration should be based on the specific mobile system offered.
Configuration Selection Guide
|
Project Requirement |
Configuration to Consider |
Main Selection Factor |
|
New CNG refueling station |
Integrated skid-mounted system |
Equipment scope, site space and dispensing demand |
|
Existing station expansion |
Standalone compressor skid |
Compatibility with existing equipment |
|
Flexible compression operation |
Dual-system compressor |
Required capacity and operating arrangement |
|
Complete packaged station |
Integrated compressor skid |
Unloading, compression, storage and dispensing scope |
|
Temporary or relocatable supply |
Mobile configuration, if available |
Transport conditions and storage arrangement |
Key Equipment Selection Factors
• Gas Source and Inlet Pressure
Tube trailer working pressure and pressure variation during unloading affect compressor selection. The inlet pressure range must match the selected compressor's operating limits.
• Required Hourly Capacity
Compressor displacement should be evaluated against average gas consumption, peak-hour demand and the expected number of vehicles served.
• Storage and Dispensing Capacity
Storage cylinder capacity and dispenser quantity influence the station's ability to handle fluctuating demand. These components should be selected together with the compressor.
• Site and Environmental Conditions
Available installation space, ambient temperature, cooling requirements and electrical supply affect equipment layout and configuration.
• Existing Equipment Compatibility
For expansion projects, the compressor must be compatible with existing storage pressure levels, piping, electrical supply, control systems and dispensing equipment.

CNG daughter station performance depends on the coordination of gas unloading, compression, storage and dispensing. The following factors are relevant when developing a station configuration.
Tube Trailer Pressure and Gas Recovery
Compressor selection should account for changing inlet pressure as CNG is discharged from tube trailers. The published station information refers to 20 MPa and 25 MPa trailer pressure classes and a residual trailer pressure range of 0.5–1.0 MPa for a specified configuration.
The achievable residual pressure depends on the compressor arrangement, inlet conditions and actual operating parameters.
Capacity and Peak-Demand Matching
Compressor displacement and cascade storage capacity should be matched to expected gas consumption and peak refueling demand. Dual-system arrangements provide an additional option for adjusting compression operation to changing demand.
Site Layout and Environmental Adaptation
Installation space, ambient temperature, cooling conditions and equipment orientation influence skid arrangement. Linear, L-shaped or split layouts may be considered where supported by the selected design.
Station Equipment Integration
Unloading, compression, cooling, priority control, cascade storage and dispensing equipment need to operate as a coordinated system. PLC control and communication interfaces can be incorporated according to the selected configuration and project requirements.
Application Scenarios
Off-Pipeline CNG Refueling Stations
Receive CNG from tube trailers and supply natural gas vehicles through compression, storage and dispensing equipment.
Commercial Vehicle and Fleet Depots
Serve bus fleets, logistics vehicles and other CNG-powered commercial vehicles. Compressor capacity, storage arrangement and dispenser quantity should reflect fleet demand.
Industrial and Remote Gas Supply
Provide transported natural gas to industrial facilities and remote locations without direct pipeline access, subject to the required downstream gas pressure and supply conditions.
Manufacturing & Quality Control
manufacturing and quality management as core business activities. Its published quality control information covers structural fabrication, high-pressure piping, hydraulic systems, electrical control and factory testing.
Structural Skid Fabrication
• Carbon steel structural frames are fabricated and welded according to the specified welding requirements.
• Welded surfaces are inspected before surface treatment.
• Steel structures are blast-cleaned to Sa 2.5 where specified.
• Protective coatings include epoxy primers and polyurethane topcoats.
High-Pressure Piping and Pressure Testing
• 316L stainless steel tubing is specified for applicable high-pressure piping.
• Seamless thick-walled carbon steel pipes are used where required by the design.
• Piping welds undergo radiographic inspection according to the specified inspection requirements.
• Hydraulic pressure testing is specified at 1.5 times the maximum working pressure.
Hydraulic and Electrical System Inspection
• Hydraulic cylinders and proportional control blocks undergo assembly and functional inspection.
• Hydraulic system checks include volumetric efficiency, internal bypass leakage and thermal stability.
• Electrical connections, PLC functions, monitoring signals and control logic are inspected.
• Safety interlocks and emergency shutdown functions are checked.
Factory Acceptance Testing
The published quality control process specifies a 72-hour continuous test for fully assembled skid systems under no-load and full-load conditions.
|
Inspection Item |
Published Requirement |
|
Continuous Test Duration |
72 hours |
|
Vibration |
Operating vibration monitoring |
|
Discharge Temperature |
Continuous monitoring |
|
Noise Level |
Below 75 dB(A) at 1 meter |
|
PLC Control |
Automatic control and safety interlock response |
|
Final Inspection |
Overall equipment operating condition |
Applicable inspection records and FAT documentation can be provided according to the supplied equipment scope.
Qingdao Lenado Intelligent Equipment Co., Ltd. presents project applications involving CNG, LNG and LCNG gas station facilities. Its project portfolio includes installed gas station equipment, enclosed compressor packages, storage assemblies, process piping and associated refueling facilities.
The displayed installations illustrate different equipment arrangements for gas compression, gas storage and refueling applications. These project references provide practical context for evaluating equipment integration and station configuration requirements.
For CNG daughter station projects, equipment selection can be adapted to gas source conditions, required compression capacity, storage arrangements and site layout.

Certifications & Technical Credentials
Qingdao Lenado Intelligent Equipment Co., Ltd. holds a Production License of Special Equipment covering specified pressure piping components, component combination devices and gas pressure regulating devices.
The license is issued by the Shandong Provincial Administration for Market Regulation and is displayed as valid through May 17, 2027.
The company also holds a utility model patent related to hydraulic-driven gas compression cylinder technology (Patent No. ZL 2022 2 2742669.0; Publication No. CN 218542546 U), reflecting its technical development in hydraulic compression equipment.
These credentials provide supporting evidence of the company's manufacturing qualifications and technical development in gas equipment.
Customization & Technical Support
Engineering Customization
CNG daughter station configurations can be adapted to project requirements through equipment selection, skid arrangement and system integration.
Available customization areas include:
• Compressor Arrangement: Single-system or dual-system configurations.
• Cooling System: Air cooling, water circulation or mixed cooling, depending on the selected model.
• Electrical Supply: 380V, 415V or 480V configurations.
• Power Frequency: 50Hz or 60Hz.
• Control System: PLC control with available Modbus RTU, Profibus or Ethernet communication interfaces.
• Skid Layout: Linear, L-shaped or split arrangements.
• Storage Arrangement: Different cylinder quantities and medium- or high-pressure storage configurations.
Technical Support
Lenado's technical support covers equipment selection, system integration, installation guidance and operation.
Pre-Sales Engineering
• Review gas source, inlet pressure and hourly consumption requirements.
• Assist with compressor model and capacity selection.
• Evaluate site conditions, equipment layout and electrical requirements.
Documentation and Delivery
• Equipment technical specifications and drawings.
• Operating and maintenance manuals.
• Applicable material inspection and pressure test records.
• Available factory acceptance test documentation.
Installation and Operation Support
• Technical guidance for gas pipeline and electrical connections.
• Equipment startup and control system guidance.
• Operating parameter and safety interlock verification support.
• Technical assistance with alarm analysis, troubleshooting and maintenance.
FAQ
We are one of the most experienced CNG daughter station manufacturers in China, also support customized service. Please feel free to wholesale advanced CNG daughter station made in China here from our factory. Quality products and reasonable price are available.
