CNG Station Manufacturer for Complete Natural Gas Refueling Solutions
Lenado provides CNG station equipment and integrated natural gas refueling solutions for pipeline-fed stations, tube-trailer-fed stations, mobile refueling projects and specialized gas supply applications. The product range covers CNG compressors, station equipment, storage and dispensing systems, and supporting equipment for different project configurations.
Qingdao Lenado Intelligent Equipment Co., Ltd. serves CNG station investors, EPC contractors, gas distributors, fleet operators and industrial gas users. Equipment selection and system configuration are based on gas source, inlet pressure, required capacity, discharge pressure, site conditions and operating requirements.
-
Instrument Air SkidThe Instrument Air Skid is a packaged compressed air system designed to supply clean, dry air to pneumatic instruments, control valves and other air-operated equipment in CNG filling stations. It integrates the air compressor, air...view more
-
Mobile CNG Refueling StationThe Mobile CNG Refueling Station is an integrated, containerized system for CNG compression, storage and vehicle refueling in locations without permanent gas infrastructure. Combining a hydraulic-driven compressor, storage cascade,...view more
-
CNG Natural Gas StationThe CNG Natural Gas Station is a high-capacity compression solution built around a dual-system hydraulic reciprocating compressor skid. Designed for commercial CNG fueling projects, it combines flexible compression capacity with...view more
-
Rng Fueling StationsRNG Fueling Stations are designed to compress upgraded renewable natural gas (RNG) into high-pressure fuel for vehicle refueling. They are suitable for renewable energy project developers, biogas plant operators, natural gas suppliers,...view more
-
Portable CNG Fueling StationThe Portable CNG Fueling Station is a containerized mobile refueling system designed to supply CNG to vehicles in areas without direct natural gas pipeline access. It integrates gas unloading, hydraulic compression, cascade storage and...view more
-
Open CNG Gas StationOpen CNG Gas Station is an outdoor skid-mounted natural gas refueling system integrating gas compression, cooling, high-pressure storage, dispensing, and automated control. Its weatherproof, sound-insulated enclosure makes it suitable...view more
-
Natural Gas Charging StationsNatural Gas Charging Stations provide integrated CNG compression solutions for pipeline-fed stations, trailer-supplied facilities, commercial fleet depots, and station expansion projects. Using hydraulic reciprocating compression...view more
-
CNG Station CompressorThe CNG Station Compressor is designed for natural gas compression in CNG refueling stations. It provides a high-pressure gas supply solution for station storage and vehicle refueling, serving as a core compression unit in CNG station...view more
-
CNG Gas Pump StationThe CNG Gas Pump Station is a natural gas compression system designed for CNG vehicle refueling facilities. It is suitable for CNG station investors, EPC contractors and gas equipment distributors requiring high-capacity compression...view more
-
Complete CNG Filling Station CompressorThe Complete CNG Filling Station Compressor is a hydraulic piston compression unit designed for CNG sub-stations, standard filling stations and mother stations. It supports high-pressure gas storage and vehicle refueling through an...view more
-
Complete CNG Fill Up StationsThe Complete CNG Fill Up Station is an integrated natural gas refueling system designed for public filling stations, bus depots and commercial vehicle fleets. It combines gas treatment, compression, high-pressure storage and vehicle...view more
-
Complete CNG Dispensing StationThe Complete CNG Dispensing Station is an integrated natural gas compression and refueling system for commercial CNG stations, public transportation facilities and private fleet fueling projects. It combines gas pretreatment,...view more
CNG Station Equipment & Product Categories
Lenado's CNG product range covers complete station solutions, mobile and portable refueling systems, compression equipment and auxiliary systems.
Fixed CNG Stations
• CNG Natural Gas Station
A pipeline-fed natural gas refueling solution that uses compression, high-pressure storage and dispensing equipment to supply CNG to vehicles. The system configuration is determined by pipeline inlet conditions, required gas flow, vehicle demand and site layout.
• CNG Standard Station
A conventional CNG station configuration for vehicle refueling, generally incorporating a compressor, gas storage cascade, priority control system and CNG dispensers. Equipment capacity and arrangement are selected according to the station's operating requirements.
• CNG Mother Station
A CNG compression and tube-trailer filling facility connected to a natural gas pipeline. Pipeline gas is compressed and transferred into CNG tube trailers for transportation to daughter stations or other downstream users. Compressor capacity, filling pressure and trailer requirements are key factors in system configuration.
Daughter, Mobile & Portable CNG Stations
• CNG Daughter Station
Designed for locations without direct access to a natural gas pipeline. The station receives CNG from tube trailers and supplies gas through unloading, pressure regulation or boosting where required, storage and dispensing equipment. The configuration depends on trailer supply pressure, required outlet pressure and downstream consumption.
• Mobile CNG Refueling Station
A transportable CNG refueling solution for locations requiring flexible deployment or temporary gas supply. An available equipment configuration includes a DRY1000 hydraulic-drive piston compressor, a 0.8 m³ water-volume cylinder cascade, a dual-hose dispenser, a gas unloading post and a PLC control system.
The compressor raises gas pressure, the cylinder cascade provides high-pressure storage, and the dispenser supplies CNG to vehicles. The unloading post and control system form part of the station's operating arrangement.
• Portable CNG Fueling Station
A containerized CNG station arrangement for remote sites, temporary projects and locations where a fixed station is not practical. The equipment layout can integrate compression, storage, control and dispensing functions within a transportable structure. The final arrangement depends on the gas supply method, required capacity and site conditions.
CNG Compression Equipment
• CNG Booster Compressor
Used to increase gas pressure within a CNG supply or processing system when the available inlet pressure is insufficient for the required downstream operating conditions. Selection depends on inlet pressure, target outlet pressure, gas flow and operating duty.
• CNG Station Compressor
The main compression equipment in a CNG refueling station. It compresses incoming natural gas to the pressure required by the station's storage and dispensing systems. Compressor selection must account for gas source, inlet pressure, capacity, discharge pressure and operating conditions.
Lenado's compressor product range supports both individual equipment supply and integration into CNG station systems.
Specialized CNG Station Solutions
• Open CNG Gas Station
An outdoor station arrangement in which major CNG equipment is installed in an open or skid-mounted layout rather than a fully enclosed station building. Site layout, equipment protection, environmental conditions and maintenance access are important considerations.
• RNG Fueling Station
A refueling solution for compressed renewable natural gas produced from sources such as agricultural waste, landfill gas and wastewater treatment processes. Before compression, the purified gas must meet the quality requirements of the downstream equipment. Gas composition, moisture and contaminants are important factors in determining the required treatment and compression configuration.
Auxiliary Equipment
• Instrument Air Skid
An auxiliary compressed-air system that can support pneumatic instruments and control equipment in gas facilities. A typical arrangement may include an air compressor, air receiver, dryer and filtration components. The required configuration depends on instrument air consumption and operating pressure.
CNG Station Solutions by Project Requirements
Different gas sources and operating conditions require different station configurations. The following guide helps identify the relevant equipment category for a project.
|
Project requirement |
Relevant solution |
Main configuration considerations |
|
Natural gas supplied by pipeline for vehicle refueling |
CNG Natural Gas Station / CNG Standard Station |
Pipeline pressure, gas flow, compressor capacity, storage and dispensing demand |
|
Pipeline gas compressed and loaded into tube trailers |
CNG Mother Station |
Pipeline supply, compression capacity, filling pressure and trailer requirements |
|
CNG delivered by tube trailers to a site without pipeline access |
CNG Daughter Station |
Trailer pressure, unloading arrangement, required outlet pressure and storage |
|
Flexible or transportable vehicle refueling |
Mobile CNG Refueling Station |
Transport arrangement, compressor, storage, dispensing and control system |
|
Temporary or remote gas supply |
Portable CNG Fueling Station |
Containerized layout, gas source, capacity and site conditions |
|
Existing station requiring additional gas pressure |
CNG Booster Compressor |
Existing inlet pressure, required outlet pressure and gas flow |
|
New station requiring primary compression equipment |
CNG Station Compressor |
Gas source, operating capacity, discharge pressure and duty cycle |
|
Outdoor equipment installation |
Open CNG Gas Station |
Site layout, weather exposure, equipment protection and maintenance access |
|
Refueling using purified renewable natural gas |
RNG Fueling Station |
Gas composition, moisture, contaminants, treatment and compression requirements |

Selecting a CNG station requires more than matching a compressor's rated capacity. The gas supply conditions and the station's operating requirements must be considered together.
Gas Source and Inlet Pressure
Determine whether the station receives natural gas directly from a pipeline or CNG from tube trailers. Pipeline supply pressure and trailer delivery pressure affect the compression process and equipment arrangement.
Required Gas Capacity
Define the required hourly flow rate and expected daily consumption. Vehicle refueling demand, fleet size and operating hours help determine compressor capacity and storage requirements.
Discharge Pressure and Storage
The required outlet pressure and storage arrangement must match the downstream application. Storage capacity and pressure levels influence the station's ability to meet demand during peak consumption.
Site and Installation Conditions
Available land, equipment layout, transportation access, power supply, environmental conditions and maintenance space all affect station design. Outdoor, containerized and fixed installations may require different equipment arrangements.
Gas Quality and Applicable Requirements
Gas composition, moisture and contaminants should be assessed against the requirements of the compressor and downstream equipment, particularly for RNG applications. Electrical, safety and regulatory requirements must also be evaluated according to the destination market and project scope.
CNG Station Engineering & System Integration
A CNG station is an interconnected gas supply system. Compressor capacity, storage volume, control arrangements and dispensing demand need to be considered as part of the same operating process.
Lenado's CNG equipment range supports system configurations for pipeline-fed and tube-trailer-fed gas supplies, including compression, storage, unloading and dispensing equipment.
Key engineering considerations include:
Gas process configuration: Matching the gas source, inlet conditions, compression stages and downstream supply requirements.
Equipment selection: Selecting compressors and supporting equipment according to gas flow, pressure requirements and operating duty.
Storage and dispensing arrangement: Coordinating high-pressure storage and dispensing equipment with expected consumption.
System control: Incorporating control equipment, including PLC-based control in applicable configurations.
Installation layout: Arranging equipment according to site space, access, maintenance and project installation conditions.
Project engineering documentation may include P&ID drawings, general arrangement drawings, electrical diagrams and equipment specifications according to the agreed supply scope.
Manufacturing, Quality Control & Company Qualifications
Qingdao Lenado Intelligent Equipment Co., Ltd. integrates equipment R&D, production, machining and assembly. Its manufacturing resources include R&D personnel, CNC production and processing equipment, and dedicated equipment assembly facilities for CNG compressors and related high-pressure fluid equipment.
Manufacturing Capabilities
• Product Development: R&D personnel supporting the development and technical improvement of gas compression equipment.
• CNC Machining: In-house machining resources for manufacturing mechanical components.
• Equipment Assembly: Assembly facilities for CNG compressors and related high-pressure fluid equipment.
Quality Control
Quality control for CNG compression equipment involves multiple stages throughout the manufacturing process:
• Incoming Material Inspection: Checking incoming materials and purchased components against applicable specifications and procurement requirements.
• Machining Inspection: Checking machined components for dimensional accuracy and processing quality.
• Component Inspection: Examining components before assembly to identify visible defects and assembly-related issues.
• Assembly Inspection: Checking equipment assembly, component connections and installation conditions against technical drawings and assembly requirements.
• Final Equipment Inspection: Reviewing equipment condition, assembly completeness and relevant technical requirements before delivery.
Company Qualifications & Technical Credentials
• ISO 9001 Quality Management System Certification.
• Special Equipment Manufacturing License.
• Explosion-proof qualifications for relevant products.
• 21 product patents.
• More than 80 technologies with independent intellectual property rights.
These manufacturing resources, production procedures and technical credentials support Lenado's manufacturing of CNG mother station compressors, daughter station compressors, standard station compressors and other high-pressure fluid equipment.
CNG station equipment requires appropriate technical support during selection, installation and operation. Lenado provides services covering pre-sales technical communication and post-delivery assistance.
Pre-Sales Technical Support
Technical discussions cover gas source, inlet pressure, required capacity, discharge pressure, equipment selection and project configuration. This information helps establish a suitable equipment scope for the intended application.
Commissioning and Operator Training
On-site commissioning support and operator training are available to assist with equipment start-up and operating procedures.
Warranty and Maintenance
• 12-month warranty.
• Lifelong maintenance support.
• Remote technical assistance.
• Fault diagnosis and maintenance guidance.
Service arrangements are provided according to the equipment supplied and the agreed project contract.

FAQ
We are one of the most experienced CNG station manufacturers in China, also support customized service. Please feel free to wholesale advanced CNG station made in China here from our factory. Quality products and reasonable price are available.
