Instrument Air Skid

Instrument Air Skid

The Instrument Air Skid is a packaged compressed air system designed to supply clean, dry air to pneumatic instruments, control valves and other air-operated equipment in CNG filling stations. It integrates the air compressor, air receiver, filtration units, dryer and connecting piping on a common steel base. The skid-mounted design provides a coordinated auxiliary air supply package for new CNG stations and existing facility upgrades, with equipment capacity and treatment configuration tailored to project requirements.
Send Inquiry
Description

The Instrument Air Skid is a packaged compressed air system designed to supply clean, dry air to pneumatic instruments, control valves and other air-operated equipment in CNG filling stations. It integrates the air compressor, air receiver, filtration units, dryer and connecting piping on a common steel base. The skid-mounted design provides a coordinated auxiliary air supply package for new CNG stations and existing facility upgrades, with equipment capacity and treatment configuration tailored to project requirements.

 

Technical Specifications

 

Item

Specification

System Components

Air compressor, air receiver, air dryer, filters, piping, valves, pressure switch and safety valve

Installation Type

Skid-mounted system

Dryer Options

Refrigerated dryer / Dual-tower adsorption dryer

Adsorption Cycle

5 minutes

Regeneration Cycle

4.5 minutes

Repressurization Cycle

0.5 minutes

Outlet Pressure Dew Point

-20°C to -40°C (adsorption dryer)

Regeneration Air Consumption

Approx. 12% of processing capacity (adsorption dryer)

Maximum Inlet Oil Content

≤0.1 mg/m³ (adsorption dryer requirement)

Adsorption Dryer Inlet Temperature

Below 45°C

Air Supply Capacity

Selected according to station air consumption

Working Pressure

Configured according to project requirements

Air Receiver Volume

Determined by system demand and operating conditions

 

The drying cycle, pressure dew point, regeneration air consumption and inlet air requirements apply to the dual-tower adsorption dryer configuration. Compressor capacity, working pressure and receiver volume are determined by individual project requirements.

 

Integrated Air Supply and Filtration

 

The Instrument Air Skid combines compressed air generation, storage and treatment on a common steel base. Instead of procuring and arranging the main auxiliary air equipment separately, station operators receive an integrated package with the principal components assembled into one system.
For the adsorption dryer configuration, the air treatment sequence is arranged to control moisture and oil contamination before the air reaches the drying unit:
• Air Receiver: Provides compressed air storage and helps accommodate variations in downstream air demand. It is installed upstream of the adsorption dryer.
• Main Line Filter: Removes contaminants from the compressed air before the subsequent treatment stages.
• Oil Removal Filters: Two oil-removal filters are installed upstream of the adsorption dryer to maintain inlet oil content at or below 0.1 mg/m³.
• Adsorption Dryer: Removes moisture through desiccant adsorption to achieve the specified outlet pressure dew point.
This component arrangement provides a defined air treatment process within the skid, with filtration and drying equipment matched to the required compressed air quality.

 

Dryer Selection and Configuration

 

Two drying options are available to suit different compressed air quality requirements:
• Refrigerated Dryer: Suitable for applications requiring conventional compressed air drying.
• Dual-Tower Adsorption Dryer: Designed for applications requiring lower pressure dew points, with an outlet pressure dew point of -20°C to -40°C.
The dual-tower adsorption configuration uses alternating drying and regeneration operations. One tower dries the incoming compressed air while the other undergoes regeneration and repressurization. The towers then switch operating roles to maintain continuous air treatment.
Its operating cycle consists of 5 minutes of adsorption, 4.5 minutes of regeneration and 0.5 minutes of repressurization. Approximately 12% of the dryer's processing capacity is consumed during regeneration.
To maintain adsorption performance, the inlet air temperature must remain below 45°C and the oil content must not exceed 0.1 mg/m³. A precooler can be incorporated when the incoming air temperature exceeds the specified limit. Two upstream oil-removal filters are required to protect the desiccant from oil contamination.

 

Installation and Maintenance

 

The skid-mounted structure simplifies equipment positioning and site integration. For the adsorption dryer configuration, the installation layout should also accommodate ventilation, temperature control and routine maintenance.
• Installation Environment: Indoor installation in a well-ventilated area is preferred for the adsorption dryer. Outdoor exposure should be avoided where possible.
• Maintenance Clearance: At least 1 meter of clearance should be maintained around the dryer for inspection, servicing and desiccant replacement.
• Bypass Arrangement: A bypass line and valve can be incorporated to maintain the station's air supply arrangement while the dryer is temporarily isolated for maintenance.
• Temperature Control: A precooler is required when the adsorption dryer's inlet air temperature exceeds 45°C.
• Equipment Arrangement: The air receiver is positioned upstream of the dryer, followed by the main line filter and two oil-removal filters before the adsorption unit.
The installation layout and maintenance access can be incorporated into the skid design to suit the available equipment space and site conditions.

 

Customized Configuration

 

Qingdao Lenado configures the Instrument Air Skid according to station air consumption, operating pressure, compressed air quality and installation conditions.
Available configuration considerations include:
• Air compressor capacity and working pressure
• Air receiver volume
• Refrigerated or dual-tower adsorption dryer
• Filtration stages and oil-removal requirements
• Pre-cooling and bypass arrangements
• Skid dimensions, equipment layout and maintenance access
Equipment selection takes into account the total air consumption of pneumatic instruments and control valves, including simultaneous operating demand. The compressor and receiver are then matched to the required supply capacity and pressure, while the dryer and filtration arrangement are selected according to the required air quality.

 

Manufacturing and Project Support

 

Qingdao Lenado Intelligent Equipment Co., Ltd. integrates R&D, engineering design, production and after-sales service for industrial gas equipment. Its manufacturing capabilities include CNC production and processing facilities, professional technical personnel and an established quality management system.
For the Instrument Air Skid, these capabilities support the equipment supply process through:
• Engineering Design: Technical consultation, model selection and customized arrangements for system pressure, equipment capacity and skid structure.
• Equipment Integration: Assembly of the compressor, air receiver, dryer, filters, piping and valves on a common steel base.
• Quality Management: Production and quality management under the company's ISO 9001-certified quality management system.
• Pre-delivery Testing: The integrated skid is assembled and tested before shipment, with site connections for piping and power completed during installation.
• Project Support: Production tracking, technical documentation, commissioning assistance and operator training are available for project requirements.
The company also holds a special equipment manufacturing license and product explosion-proof qualifications as part of its broader industrial equipment credentials.

Hot Tags: instrument air skid, China instrument air skid manufacturers, factory, CNG Gas Pump Station, CNG Natural Gas Station, cng station, Complete CNG Dispensing Station, Instrument Air Skid, Open CNG Gas Station

Send Inquiry
Send Inquiry