The CNG Substation Integrated Compressor is an all-in-one skid-mounted solution for CNG stations supplied by tube trailers. It integrates gas unloading, hydraulic compression, cascade storage, cooling and vehicle dispensing in one weatherproof enclosure. Designed for station investors, operators and EPC contractors, it reduces the need for separate equipment installation and on-site pipeline coordination.
Technical Specifications
Main Compressor – TYCZ-SJ Series
|
Parameter |
TYCZ-SJ 2000 |
TYCZ-SJ 2500 |
|
Gas Source |
CNG Tank Truck |
CNG Tank Truck |
|
Inlet Pressure |
3–20 MPa |
3–20 MPa |
|
Nominal Displacement |
2,000 Nm³/h |
2,500 Nm³/h |
|
Maximum Working Pressure |
≤25 MPa |
≤25 MPa |
|
Compression Method |
Two-stage hydraulic reciprocating |
Two-stage hydraulic reciprocating |
|
Compression Lines |
2 independent lines |
2 independent lines |
|
Cooling |
3 independent water-circulation loops |
3 independent water-circulation loops |
|
Gas Compression Chamber |
Oil-free |
Oil-free |
|
Storage Volume |
2.76 m³ |
2.76 m³ |
|
Control |
PLC + HMI + remote monitoring |
PLC + HMI + remote monitoring |
Built-in CNG Dispenser
|
Parameter |
Specification |
|
Standard Flow Range |
2–40 kg/min |
|
Maximum Working Pressure |
25 MPa |
|
Explosion-proof Grade |
Exdeia Ga ibmb II BT4 Gb |
|
Maximum Metering Error |
±1.0% |
|
Operating Temperature |
-25°C to +55°C |
Cascade Storage System
|
Parameter |
Specification |
|
Total Water Volume |
2.76 m³ |
|
Medium/High-Pressure Bank Ratio |
2:1 |
|
Design Pressure |
27.5 MPa |
|
Rated Working Pressure |
25 MPa |
|
Cylinder Material |
4130X Alloy Steel |
|
Single Cylinder Water Volume |
0.92 m³ |
|
Single Cylinder Dimensions |
Φ559 × 24 × 4,950 mm |
|
Single Cylinder Weight |
1,678 kg |
Integrated Configuration and Operating Process
The integrated skid combines the main equipment required for CNG unloading, compression, storage and refueling:
• CNG unloading system and gas filtration
• Hydraulic reciprocating compressor
• Medium- and high-pressure storage cylinders
• Three independent cooling circuits
• Built-in explosion-proof CNG dispenser
• PLC control cabinet and safety protection devices
Major components, gas pipelines and electrical connections are assembled on a common skid. Factory assembly and commissioning reduce on-site equipment coordination and installation work. The weatherproof, sound-insulated enclosure supports outdoor installation, while modular cabinet panels provide access for inspection and maintenance.
The system uses staged gas supply to make use of available trailer pressure and stored CNG:
• Direct supply: Trailer gas supplies vehicles when its pressure is sufficient.
• Medium-pressure storage: The medium-pressure bank supplements the supply as trailer pressure decreases.
• High-pressure storage: The high-pressure bank takes over when medium-pressure supply becomes insufficient.
• Automatic replenishment: The compressor starts recharging the storage banks when pressure reaches the preset operating threshold.
This arrangement helps reduce unnecessary compressor starts and makes coordinated use of available gas supply.
Key Technical Features
Dual Independent Hydraulic Compression Lines
The TYCZ-SJ series adopts a two-stage, double-acting hydraulic reciprocating structure with two independent compression lines. The lines can operate simultaneously or independently, allowing one line to serve as standby when required. This provides flexibility for variable station demand and maintenance scheduling.
Oil-Free Gas Compression and Residual-Pressure Restart
Hydraulic oil is isolated from the natural gas compression chambers, eliminating the need for lubricating oil inside the gas chambers and reducing the risk of oil contamination. The hydraulic drive also allows the compressor to restart without first venting high-pressure residual gas from the compression cylinders, helping reduce gas losses during restart.
Three Independent Cooling Loops
Separate circulation circuits manage the thermal requirements of the compressed gas, hydraulic oil and compression cylinders. Gas cooling removes heat after compression, hydraulic oil cooling controls operating temperature, and antifreeze circulation through cylinder jackets helps protect seals and compression components.
PLC Control and Safety Protection
The PLC system coordinates automatic operation through a touchscreen HMI and monitors inlet, intermediate and discharge pressure, hydraulic oil temperature and level, gas flow, piston position and combustible gas concentration. Pressure protection, gas detection, audible and visual alarms, emergency shutdown and remote operating-data transmission support equipment monitoring and fault response.
Applications
The CNG Substation Integrated Compressor is suitable for:
• Urban satellite CNG filling stations
• Roadside and small-scale CNG refueling stations
• Logistics fleet and commercial vehicle fueling facilities
• Temporary and mobile CNG supply projects
It is particularly suitable for projects that rely on tube-trailer gas supply rather than a direct natural gas pipeline connection.
Manufacturing and Project Support
Qingdao Lenado Intelligent Equipment Co., Ltd. specializes in the R&D, manufacturing and assembly of CNG compression and high-pressure fluid equipment. Its manufacturing resources include CNC processing equipment, professional technical teams and equipment assembly facilities.
Project support includes:
• Technical consultation and equipment selection
• Customized pressure and configuration design
• Equipment commissioning and operator training
• 12-month warranty and lifelong maintenance support
• Remote technical assistance and spare parts supply
Hot Tags: CNG substation integrated compressor, China CNG substation integrated compressor manufacturers, factory, CNG Hydraulic Reciprocating Daughter Station Compressor, CNG Mobile Daughter Station , CNG Mother Station Equipment, Gas Daughter Station Compressor, Integrated CNG Daughter Station Compressor System, Integrated LNG Skid Mounted Station

