The Gas Daughter Station Compressor is a core compression unit for CNG daughter stations, designed to compress natural gas from tube trailers or low-pressure pipeline networks for vehicle refueling. It is suitable for CNG station investors, EPC contractors and gas equipment distributors seeking standalone compression equipment or integrated station solutions.
Compressor Models and Technical Specifications
Available in standalone dual-system and integrated skid configurations, the compressor range covers different gas flow requirements and station layouts.
Dual-System Compressor
|
Model |
Average Displacement (Nm³/h) |
Motor Power (kW) |
Dimensions (mm) |
Matching Dispenser Configuration |
|
TYCZ-S-1200 |
1,200 |
30 × 2 |
4200 × 2300 × 2500 |
2 dual-nozzle dispensers |
|
TYCZ-S-1600 |
1,600 |
37 × 2 |
4200 × 2300 × 2600 |
2–3 dual-nozzle dispensers |
|
TYCZ-S-2400 |
2,400 |
45 × 2 |
4200 × 2300 × 2600 |
3–4 dual-nozzle dispensers |
|
TYCZ-S-4000 |
4,000 |
90 × 2 |
4200 × 2600 × 3050 |
5–6 dual-nozzle dispensers |
|
TYCZ-S-4500 |
4,500 |
110 × 2 |
4200 × 2600 × 3100 |
5–6 dual-nozzle dispensers |
Compressor Integrated Skid
|
Model |
Average Displacement (Nm³/h) |
Motor Power (kW) |
Dimensions (mm) |
|
TYCZ-JS-1200 |
1,200 |
30 × 2 |
8000 × 2300 × 2500 |
|
TYCZ-JS-1600 |
1,600 |
37 × 2 |
9000 × 2300 × 2600 |
|
TYCZ-JS-2400 |
2,400 |
45 × 2 |
12000 × 2800 × 3000 |
|
TYCZ-JS-4000 |
4,000 |
90 × 2 |
12000 × 2800 × 3000 |
Capacity Selection
• 1,200–1,600 Nm³/h: For stations with relatively moderate gas demand.
• 2,400 Nm³/h: For medium-capacity refueling operations.
• 4,000–4,500 Nm³/h: For stations requiring higher gas throughput.
Final model selection should account for inlet pressure, available gas supply, operating hours, storage capacity and peak refueling demand. Dispenser quantities are matching configurations rather than guaranteed simultaneous dispensing capacity.
Configurations and Equipment Supply
The standalone dual-system compressor is supplied as a separate compression unit, while the integrated skid combines compression with selected station equipment.
|
Integrated Model |
Cylinder Group |
Unloading Column |
Dispenser Configuration |
|
TYCZ-JS-1200 |
2.0 m³ |
1 |
1 dispenser |
|
TYCZ-JS-1600 |
2.0 m³ |
1 |
2 dual-nozzle dispensers |
|
TYCZ-JS-2400 |
3.0 m³ |
1 |
2 dual-nozzle dispensers |
|
TYCZ-JS-4000 |
3.0 m³ |
1 |
4 dual-nozzle dispensers |
The integrated equipment may include:
• Gas compression: Dual-system compressor for gas pressurization.
• Gas storage: Cylinder group for CNG storage.
• Gas receiving: Unloading column for tube trailer connection.
• Gas dispensing: Dispensers for vehicle refueling.
Pipelines, electrical connections, instrumentation, auxiliary equipment and civil works should be defined according to the confirmed project supply scope.
Compression Technology and Control
The compressor uses a horizontal reciprocating structure with four-stage compression and inter-stage cooling. Inlet filtration helps remove contaminants before gas enters the compression system. The equipment is designed for CNG refueling pressure requirements of 20–25 MPa.
A PLC automatic control cabinet monitors operating pressure, temperature and vibration. Fault alarms and priority sequence control support equipment operation and station management.
Manufacturing and Quality Inspection
Manufacturing operations include CNC machining, equipment assembly and production inspection. Each compressor unit undergoes load testing before shipment to verify its operating condition.
Project Configuration References
The following model combinations illustrate available equipment configurations:
- TYCZ-S-1200 / TYCZ-S-1600: Standalone dual-system compressor configurations.
- TYCZ-JS-2400: 2,400 Nm³/h compressor with a 3.0 m³ cylinder group, one unloading column and two dual-nozzle dispensers.
- TYCZ-JS-4000: 4,000 Nm³/h compressor with a 3.0 m³ cylinder group, one unloading column and four dual-nozzle dispensers.
For project selection, the main considerations are gas source and inlet pressure, required throughput, peak refueling demand, storage capacity, dispenser arrangement and available installation space.
Warranty and Technical Support
The compressor is supplied with a 12-month warranty under the agreed terms. Support services include remote technical assistance, spare parts supply, on-site commissioning and operator training. Service arrangements are determined by project location and contractual scope.
FAQ
Q: What information is needed for compressor selection?
A: Provide the gas source, inlet pressure, required gas flow, expected operating schedule and refueling demand. These details help determine the suitable compressor model and station configuration.
Q: Can the compressor be connected to an existing CNG station?
A: It may be configured for an existing station, subject to compatibility with the current gas supply, storage, dispensing equipment, pipelines and control system.
Q: What should be considered when choosing an integrated skid?
A: Consider the required compression capacity, included storage volume, unloading arrangement, dispenser configuration and installation space. Confirm the complete equipment supply scope before ordering.
Q: What needs to be prepared for on-site commissioning?
A: Site access, equipment foundations, power supply, gas connections and supporting station equipment should be prepared according to the confirmed project requirements.
Hot Tags: gas daughter station compressor, China gas daughter station compressor manufacturers, factory, CNG Hydraulic Reciprocating Daughter Station Compressor, CNG Integrated Liquid Driven Substation Compressor, CNG Mobile Daughter Station , CNG Mother Station Equipment, CNG Substation Compressor, Integrated LNG Skid Mounted Station
