The CNG Hydraulic Reciprocating Daughter Station Compressor is designed for CNG daughter stations supplied by tube trailers. It integrates hydraulic drive, oil-free two-stage compression and hybrid water-air cooling to deliver high-pressure natural gas for storage and vehicle refueling. Its skid-mounted design and two cylinder configurations make it suitable for CNG station operators, project investors, EPC contractors and gas equipment integrators.
Technical Specifications
|
Specification |
TY-Z-S-2500(1600) |
TY-Z-D-1250(800) |
|
Gas Medium |
Natural Gas |
Natural Gas |
|
Inlet Pressure |
2–20 MPa |
2–20 MPa |
|
Outlet Pressure |
≤25 MPa |
≤25 MPa |
|
Average Displacement |
2500 (1600) Nm³/h |
1250 (800) Nm³/h |
|
Compressor Type |
Vertical Double-Cylinder |
Vertical Single-Cylinder |
|
Compression Stages |
2 |
2 |
|
Lubrication Method |
Oil-Free |
Oil-Free |
|
Motor Power |
95 (77) kW |
50 (40) kW |
|
Drive Method |
Motor-Driven Hydraulic Pump |
Motor-Driven Hydraulic Pump |
|
Cooling Method |
Water Cooling & Air Cooling |
Water Cooling & Air Cooling |
|
Installation |
Skid-Mounted |
Skid-Mounted |
|
Dimensions (L×W×H) |
4.2 × 2.3 × 2.5 m |
4.2 × 2.3 × 2.5 m |
|
Control System |
PLC + Touch Screen + Soft Start |
PLC + Touch Screen + Soft Start |
|
Noise Level |
≤75 dB |
≤75 dB |
|
Discharge Temperature |
≤ Ambient Temperature +5°C |
≤ Ambient Temperature +5°C |
|
Inlet Temperature |
≤40°C |
≤40°C |
Key Features
Hydraulic Drive System
An electric motor drives a hydraulic pump to power the reciprocating compression mechanism, replacing the conventional crankshaft and connecting rod transmission arrangement. This reduces mechanical transmission components and supports stable compressor operation.
Oil-Free Two-Stage Compression
The oil-free lubrication design prevents lubricating oil from entering the gas compression process. Two-stage compression with interstage cooling supports high-pressure gas delivery while controlling temperature rise during operation.
Stable Operation at Low Inlet Pressure
The compressor supports an inlet pressure range of 2–20 MPa and can process tube-trailer gas at 2–3 MPa without additional pre-boost equipment. This allows the equipment to accommodate different gas supply conditions at CNG daughter stations.
Hybrid Cooling System
Interstage cooling, closed-loop water cooling and air cooling work together to control compression temperature. The discharge temperature is maintained at no more than ambient temperature +5°C, supporting stable operation and reducing thermal stress on compressor components.
PLC-Based Automatic Control
The PLC control system, touch screen and soft-start configuration coordinate compressor operation and provide an interface for monitoring operating conditions.
Applications
This compressor is designed for tube-trailer-fed CNG daughter stations where pipeline natural gas is unavailable or direct pipeline supply is insufficient. It compresses incoming natural gas to the required high pressure for cascade storage and subsequent vehicle refueling.
Typical applications include:
• CNG daughter stations supplied by tube trailers.
• Vehicle refueling facilities in areas without pipeline gas access.
• Commercial CNG stations requiring high-pressure gas compression.
• Distributed CNG supply projects for transportation and fleet refueling.
Model Options
Two vertical cylinder configurations are available to accommodate different station throughput requirements.
TY-Z-S-2500(1600) – Vertical Double-Cylinder
The double-cylinder configuration provides the higher listed displacement of 2500 (1600) Nm³/h, making it suitable for projects with greater gas throughput requirements. Its listed motor power is 95 (77) kW.
TY-Z-D-1250(800) – Vertical Single-Cylinder
The single-cylinder configuration provides a lower listed displacement of 1250 (800) Nm³/h, offering an alternative for CNG stations with different capacity requirements. Its listed motor power is 50 (40) kW.
Both configurations share the same inlet and outlet pressure ranges, two-stage compression design, cooling method, installation dimensions and PLC control configuration. Model selection depends primarily on the required gas throughput and project operating conditions.
Installation and Project Support
Both models adopt an integrated skid-mounted structure with overall dimensions of 4.2 × 2.3 × 2.5 m. The compact package provides a defined equipment footprint for site layout and foundation planning. Factory pre-commissioning prepares the compressor package for on-site installation and connection to the station gas and utility systems.
Qingdao Lenado Intelligent Equipment Co., Ltd. provides technical support throughout equipment selection, manufacturing and project delivery.
Available services include:
• Technical consultation and compressor model selection.
• Customized discussions on operating pressure, structure and equipment configuration.
• Technical documentation and delivery coordination.
• On-site commissioning and operator training.
• 12-month warranty and long-term maintenance support.
• Remote technical assistance and spare parts supply.
Hot Tags: CNG hydraulic reciprocating daughter station compressor, China CNG hydraulic reciprocating daughter station compressor manufacturers, factory, CNG Daughter Station Equipment, CNG Integrated Liquid Driven Substation Compressor, CNG Mobile Daughter Station , CNG Substation Integrated Compressor, Gas Daughter Station Compressor, Integrated CNG Daughter Station Compressor System

