The CNG Hydraulic Piston-type Sub-station Compressor is designed to pressurize natural gas transferred from mobile storage facilities for downstream supply at CNG daughter stations. It provides a high-pressure compression solution for station operators, gas distributors, and EPC contractors managing CNG supply projects without direct pipeline access.
Using hydraulic-driven piston technology instead of conventional crankshaft-driven mechanical compression, the compressor offers an alternative equipment configuration for high-pressure gas delivery, with an oil-free lubrication design and integrated control system.
Technical Specifications and Model Comparison
The compressor is available in two configurations to accommodate different gas delivery capacities and power requirements.
|
Technical Parameters |
TYCZ-S-2500(1600) |
TYCZ-D-1250(800) |
|
Inlet Pressure |
3–20 MPa |
3–20 MPa |
|
Discharge Pressure |
≤25 MPa |
≤25 MPa |
|
Average Displacement / Flow Rate |
2500 (1600) Nm³/h |
1250 (800) Nm³/h |
|
Compressor Configuration |
Vertical, double-cylinder |
Vertical, single-cylinder |
|
Compression Stages |
Two-stage |
Two-stage |
|
Compression Medium |
Natural Gas |
Natural Gas |
|
Lubrication Method |
Oil-free |
Oil-free |
|
Drive Method |
Motor-driven hydraulic pump |
Motor-driven hydraulic pump |
|
Total Power |
95 (65) kW |
50 (35) kW |
|
Control System |
PLC + HMI touchscreen + soft starter |
PLC + HMI touchscreen + soft starter |
|
Cooling Method |
Air-cooled or water-cooled |
Air-cooled or water-cooled |
|
Installation Form |
Skid-mounted |
Skid-mounted |
|
Overall Dimensions (L × W × H) |
4.2 × 2.3 × 2.5 m |
4.2 × 2.3 × 2.5 m |
|
Noise Level |
≤65 dB |
≤65 dB |
|
Inlet Temperature |
≤40°C |
≤40°C |
|
Discharge Temperature |
≤5°C above ambient temperature |
≤5°C above ambient temperature |
The two models differ mainly in displacement capacity, cylinder configuration, and total power. Both support an inlet pressure range of 3–20 MPa and discharge pressure of up to 25 MPa, with the same listed installation dimensions and cooling options.
For model selection, buyers should evaluate the required gas delivery rate alongside the available inlet pressure and downstream pressure requirements. The higher-capacity model is intended for projects requiring greater gas throughput, while the smaller configuration provides an alternative for lower-capacity supply demands.
Hydraulic Piston Technology and Operating Features
Unlike conventional mechanical piston compressors that rely on a crankshaft-driven transmission, this compressor uses a motor-driven hydraulic pump to power the reciprocating compression process.
The hydraulic drive reduces the number of mechanical transmission components, simplifying the equipment structure and reducing mechanical wear points. Combined with oil-free lubrication, this design helps reduce maintenance requirements while preventing lubricating oil from entering the compressed natural gas stream.
The main operating advantages include:
• Simplified Drive Structure: Hydraulic power transmission reduces the complexity of conventional mechanical drive components.
• Oil-Free Compression: The lubrication design helps prevent oil contamination of the compressed natural gas.
• Reduced Mechanical Wear: Fewer mechanical transmission components help reduce wear-related maintenance requirements.
• Low-Noise Operation: The listed noise level is ≤65 dB, supporting installation in facilities where operating noise is a consideration.
Automated Control and Operating Protection
The integrated PLC control system, HMI touchscreen, and soft starter support equipment operation, process monitoring, and operating protection.
Key functions include:
• Real-time Monitoring: Displays equipment operating status and relevant operating conditions.
• Automatic Adjustment: Adjusts compressor operation according to operating conditions.
• Abnormal Condition Alarms: Alerts operators when abnormal operating conditions occur.
• Automatic Fault Diagnosis: Helps identify equipment faults.
• Emergency Shutdown: Provides a shutdown function for abnormal operating conditions.
• Remote Data Management: Supports remote monitoring and management of equipment operating data.
These functions allow station operators to monitor operating conditions, identify abnormalities, and manage compressor operation through an integrated control interface.
Skid-mounted Design and Cooling Options
Both models feature a skid-mounted installation design with overall dimensions of 4.2 × 2.3 × 2.5 m. Integrating the compressor into a defined skid structure provides a standardized equipment footprint for transportation, installation planning, and CNG daughter station layout.
Two cooling configurations are available:
• Air Cooling: Uses air as the cooling medium, suitable for installations where an air-cooled arrangement is preferred.
• Water Cooling: Provides an alternative for projects with suitable water-cooling resources and corresponding site conditions.
The cooling method can be selected according to the installation environment, available cooling resources, and operating requirements. Both models share the same listed cooling options.
Manufacturing, Quality Control and After-sales Support
Qingdao Lenado Intelligent Equipment Co., Ltd. manufactures natural gas compression equipment, including CNG mother station, daughter station, and standard station compressors.
Manufacturing and Quality Assurance
The company's manufacturing capabilities are supported by CNC processing equipment and assembly facilities. Its quality management system is certified to ISO 9001, with relevant special equipment manufacturing and product explosion-proof qualifications.
Commissioning and Technical Support
For CNG station projects, technical services include equipment commissioning, operator training, and remote technical assistance. Support also covers operating issue assessment and fault diagnosis.
Warranty and Spare Parts
The compressor is supplied with a 12-month warranty covering manufacturing defects under the applicable warranty terms. Spare parts supply and long-term maintenance support are available to assist with equipment maintenance and replacement requirements.
Hot Tags: CNG hydraulic piston-type sub-station compressor, China CNG hydraulic piston-type sub-station compressor manufacturers, factory, cng daughter station, CNG Daughter Station Equipment, CNG Hydraulic Reciprocating Daughter Station Compressor, CNG Mother Station Equipment, Gas Daughter Station Compressor, Hydraulic Piston Natural Gas Compressor

