Our LNG Refuelling Station is an integrated skid-mounted dispensing system designed for commercial LNG vehicle refuelling projects. It combines cryogenic pumping, dispensing equipment and control systems to supply LNG for buses, heavy-duty trucks and logistics fleets. With dual-pump configurations and project-based equipment options, it provides a practical solution for commercial LNG stations, bus depots and dedicated fleet refuelling facilities.
Technical Parameters
The LNG refuelling skid is available in two configurations, TYL-2×15 and TYL-2×22, offering different dispensing capacities and installed power to accommodate varying station requirements.
|
Technical Parameters |
TYL-2×15 |
TYL-2×22 |
|
Rated dispensing capacity |
40 m³/h |
42 m³/h |
|
Maximum flow rate |
340 × 2 L/min |
350 × 2 L/min |
|
Cryogenic pump power |
15 kW × 2 |
22 kW × 2 |
|
Total installed power |
Approx. 30 kW |
Approx. 44 kW |
|
Dispensing nozzles |
2 |
2 |
|
Pump configuration |
Dual independent pumps |
Dual independent pumps |
Both models support two-nozzle dispensing. TYL-2×22 offers a higher rated capacity and pump power, while TYL-2×15 provides an alternative for projects with different capacity requirements. Model selection depends on the required dispensing throughput and site operating conditions.
Dual-Pump Operation for Flexible Station Availability
The station uses two independent LNG cryogenic submerged pumps to support two-nozzle dispensing and alternative pump operation. The independent arrangement allows one pump to continue operating while the other is undergoing maintenance, retaining 50% of the system's stated capacity.
For bus depots, heavy-duty truck stations and logistics fleet facilities, this design provides greater operational flexibility than a single-pump arrangement. It also gives station operators more options for managing maintenance schedules and dispensing demand.
Cryogenic Components and Equipment Selection
LNG transfer requires components designed for low-temperature operating conditions. The system uses two LNG submerged centrifugal pumps, with pump selections available from ACD, Cryostar or domestic suppliers.
Additional equipment options include:
• Cryogenic piping and valves: 304 or 316L stainless steel according to project requirements.
• Vacuum-insulated piping: Available as an option to support cryogenic transfer arrangements.
• Pump selection: Different supplier options to accommodate project specifications and equipment budgets.
These configuration choices allow EPC contractors and station investors to evaluate component selection based on operating requirements, site layout and project investment considerations.
Automated Control and Integrated Safety Protection
The LNG refuelling skid uses PLC and variable-frequency drive (VFD) control to coordinate pump operation and dispensing processes. A colour touchscreen HMI provides operating information, including pressure, temperature, flow and liquid-level monitoring. The system also supports fault alarms and historical data recording.
Standard listed control and protection features include:
• PLC-based control and variable-frequency pump operation.
• Automatic pump sequencing.
• Pressure, temperature, flow and liquid-level monitoring.
• Emergency shutdown (ESD) and emergency stop buttons.
• LNG leakage and combustible gas detection.
• Overpressure protection and emergency shut-off valves.
• Modbus TCP/IP communication, with optional 4G communication.
Optional safety configurations include flame detection and fire-protection system interfaces. An EAG emergency vaporizer with a stated rated capacity of 150 Nm³/h is also available for emergency gas release management.
The final safety arrangement and hazardous-area protection requirements are determined according to the project design and applicable local regulations.
Project Configuration and Technical Support
We support project-based equipment configuration according to required dispensing capacity, cryogenic pump selection, piping arrangement and control requirements. Options such as vacuum-insulated piping, alternative pump suppliers and remote communication can be incorporated into the equipment design.
Our technical team provides project feasibility assessment and equipment selection assistance. For new stations and upgrades to existing LNG facilities, equipment connections and supply scope can be evaluated according to the site's storage system, dispensing requirements and installation conditions.
Manufacturing Quality and After-Sales Support
Our manufacturing operations are supported by R&D resources, CNC production and processing equipment. The company operates under an ISO 9001 quality management system and holds special equipment manufacturing and product explosion-proof qualifications within their applicable scopes.
For equipment projects, we provide:
• 12-month product warranty.
• On-site equipment commissioning.
• Operator training.
• Remote technical assistance and fault diagnosis.
• Spare-parts support.
• Lifelong maintenance services
Hot Tags: LNG refuelling station, China LNG refuelling station manufacturers, factory, L CNG Filling Skid, LNG Bunkering Station, LNG Filling Station, LNG Refuelling Station, lng stations, Skid mounted LNG Vehicle Refueling Station

